> I n s t a l l a t i o n
Co u n t r y
Au t o S e a rch
Manual Searc h
Edit C h a n n e l s
Fr a n ce
Move Enter
Auto Search
Stop Searching processing
Progressing
Stop
Chapter 6 >> Setting Channels
You can automatically scan digital channels for the frequency ranges available
(availability depends on your region).
Digital channels can be scanned only in Digital TV input mode. Please make
sure the Main Input is set to Digital TV using the AV button.
1 Press the MENU button
2 Select Installation using the ▲/▼ button and press the OK or ► button.
3 Select Country using the ▲/▼ button.
4 Select the country where you are now located using the ◄/► button.
5 Select Auto Search using the ▲/▼ button and press the OK or ► button.
Search is highlighted.
6 Press the OK button to start searching channels. It starts to scan channels.
To stop scanning channels, press the OK button.
7 After the channel scanning completes, select Save using the ▲/▼ button
and press the OK button to save the founded channels.
Note: In Germany, you can view the Antenna Power menu. If you connect an
active antenna to the TV, you have to set the Antenna Power to On to supply
the 5V power into antenna. The default value is Off. Active antenna is a portable
or indoor antenna which needs power supply from the product because it does
not have power cord for itself.
Scanning Digital Channels Automatically
To Next Page
Loading...
Need help?
General
