I Receiving Radio Broadcasts
You can browse through a// the stations or use the preset function to go immedia_e/y to a pardcu/ar station.
oil o©
1 Press FM or AM to select the band.
ANALOG
ANALOG
AUTO MUTING
[] [] VOLUME
iZ e J _.........m
V
TUNED STEREO AUTO MUTING
[] [] VOLUME
i].:i" i.Z) i i7i c...........r" "-",
The last received station of the selected band is tuned in.
Press FM/AM TUNING A or V repeatedly until
you find the frequency you want.
* Pressing FM/AM TUNING A increases the frequency.
* Pressing FM/AM TUNING V decreases the frequency.
ANALOG TUNED STEREO AUTO MUTING
[] [] VOLUME
i""i i'-'i "-'i t', 1i t i "_ "i I_':
i::.::iiTL:i.:L:i i i i! .c'.C; ....e
Notes: 3
• To select the band from the remote control, press FM/AM
repeatedly. Each time you press the button, the band alternates
between FM and AM.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the STEREO indicator
also lights up (except when selecting "MODE MONO" as the FM
reception mode).
• When you hold and then release the button in step 2, the frequency
keeps changing until a station is tuned in. 4
L____J L_____I
Once a station is assigned to a channel number, the station can be
quickly tuned in. You can preset up to 30 FM and 15AM stations.
To st;ore t;he preset; st;at;ions
Before you start, reinember...
There is a time limit in doing the ff>llowing steps. If the setting is
canceled before you finish, start from step 2 again.
Tune in the station you want to preset (see
"Tuning in to Stations Manually").
* If you want to store the FM reception mode for this station,
select the FM reception mode you want. See "Selecting the
FM Reception Mode" on page 15.
2 Press MEMORY.
ANALOG TUNED STEREO AUTO MUTING
[] [] VOLUME
r='l r='i "='i i_,'I i i %; .....i i....
......... , =, , f_. I......... I=,=a _.=a= .=.=
The channel number position starts flashing on the display for
about 5 seconds.
Press FM/AM PRESET A or v to select a
channel number while the channel number
position is flashing.
ANALOG TUNED STEREO AUTO MUTING
[] [] VOLUME
! ! i i i v,/i ! i....! L..i
............ i ir_ £'. ..........
OH- +_ _ ,'_ !...J !._J.._J
Press MEMORY again while the selected channel
number is flashing on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.
Repeat steps 1 to 4 until you store all the stations
you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored
one.
14
To Next Page
Loading...
Need help?
General
