JVC RX-509VTN - Product Specifications; Amplifier Technical Specifications

Specifications
Amplifier Output Power (Front Channel)
Canada
Europe and Australia
Other Countries
Output Power (Center Channel)
4-channel operation
5-channel operation
Total Harmonic Distortion (8 ohms, 1 kHz)
Canada
Europe and Australia
Other Countries
Intermodulation Distortion
Canada
Europe and Australia
Other Countries
Frequency Response
PHONO (RIAA equalization)
CD / TAPE 1 / TAPE 2
Signal-to-Noise Ratio (°66 IHF / ’78 THF/DIN)
PHONO
CD / TAPE 1 / TAPE 2
Input Sensitivity / Impedance (1 kHz)
PHONO
CD / TAPE 1 / TAPE 2
Output Level
TAPE 1 / TAPE 2
Tone Control Range
Page 28
80 watts per channel, min. RMS, both
channels driven into 8 ohms from 20
Hz to 20 kHz with no more than
0.06% total harmonic distortion.
70 watts per channel, min. RMS, both
channels driven into 4 ohms at 1 kHz
with no more than 0.9% total
harmonic distortion. (IEC 268-3/DIN)
70 watts per channel, min. RMS, both
channels driven into 8 ohms at 1 kHz
with no more than 0.9% total
harmonic distortion. (IEC 268-3/DIN)
20 watts per channel, min. RMS, both
channels driven into 8 ohms at 1KHz,
with no more than 0.7% total
harmonic distortion
Total of 10 watts, min. RMS, into
8 ohms at 1KHz, with no more than
0.7% total harmonic distortion
0.06 %* at 80 watts output
0.06 %* at 50 watts output
0.06 %* at 70 watts output
0.06 % at 60 watts output
0.06 % at 35 watts output
0.06 % at 50 watts output
20 Hz to 20 kHz (+0.5 dB)
10 Hz to 30 kHz (+1 dB)
70 dB / 78 dB (REC OUT) / 66 dB
91 dB / 80 dB /67 dB
2.5 mV / 47k ohms
250 mV / 47k ohms
250 mV
BASS (at 100 Hz) +8 dB
TREBLE (at 10 kHz) +8 dB