JVL MAC00-EC41 - Page 24

24 JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors
2.3 Connector description
2.3.2 Expansion module MAC00-Ex41 (extended IO) connector description
The MAC00-Ex41 offers IP65 protection and M12 connectors which makes it ideal for
automation applications where no additional protection is desired. The M12 connectors
offer solid mechanical protection and are easy to unplug.
The connector layout:
(Continued next page)
“PWR” - Power input. M12 - 5pin male connector
Signal name Description Pin no.
JVL Cable
WI1000-
M12F5T05N
Isolation
group
P+
Main supply - Connect with pin 2 *
When installed in MAC050 to 141 = 12-48VDC
When installed in MAC400-4500 = 18-30VDC
1 Brown 1
P+ Main supply - Connect with pin 1 * 2 White 1
P- Main supply ground. Connect with pin 5 * 3 Blue 1
CVI
Control supply nominal +12-48VDC.
DO NOT connect >50V to this terminal !
A small leakage current may exist on this pin if
not used.
Connect this terminal to ground if not used.
4 Black 1
P- Main supply ground. Connect with pin 3 * 5 Grey 1
* Note: P+ and P- are each available at 2 terminals. Make sure that both terminals are connected in order to
split the supply current in 2 terminals and thereby avoid an overload of the connector.
Only MAC
Expansion module MAC00-Ex41 front plate
Extended I/O connections (MAC00-EC41 shown)
L/AIN
PrimaryEthernet
channel
M12‐4pinfemale
Ethernetcoded
(Dcoded)
L/AOUT
SecondaryEthernet
channel
M12‐4pinfemale
Ethernetcoded
(Dcoded)
Usedwhenmodule
isdaisychained
TT3087-02GB
PWR
Powersupply
M12‐5pinmale
connectorincluding:
and
P+(primarysupply),andCVI
(secondarysupply) P‐
I/O
I/O’sandRS232interface
M12‐17pinfemale
connectorincludes:
4digitalinputsand2digital
outputs,2analogueinputs
2RS422/RS485multifunction
channels