Open a door with PIN code and
fingerprint double identification mode
Open a door with fingerprint and
fingerprint double identification mode
Open a door with a mechanical key
1. Touch the keypad
with your palm
2.Input the scramble code and 8-digit PIN
code and press # button
3. Place double identified
fingerprint on fingerprint
reader
Verification will not be ordered when the
door is unlocked by double identification
mode.
The lock will flash the double identification
user ID when the lock is unlocked by
double identification user.
1.Place a registered fingerprint on the
fingerprint reader
2. Place double
identified fingerprint on
fingerprint reader
Verification will not be ordered when the
door is unlocked by double identification
mode.
1.Slide the handle cover
2.Insert the mechanical key and rotate 90 degree.
Then push down the handle to unlock the door.
A manual key can be used during
battery change or when the product is
not working properly.
A manual key should be removed after
use.
Voice guide
“Please double identify”
4. Push down the handle to
unlock the door
Voice guide
“Please double
identify”
3. Push down the handle to unlock the door
In case of emergency, please keep at
least 1 key outside in a safe place.
23
To Next Page
Loading...
