Open a door with a fingerprint
Open a door with a PIN code Open a door with a remote control
1. Place a registered
fingerprint on the
fingerprint reader
2. Voice guide “Verification Succeeded, door
has been unlocked”
3. Push down the handle to
unlock the door
The lock will flash the user ID when the lock is
unlocked by fingerprint, PIN code, remote
control or double identification user.
1.Touch the
keypad with your
palm
2. Input the
scramble code
and 8-digit PIN
code and press #
button
3. Push down the handle to unlock the door
A scramble code is a set of random
numbers entered before or after the input of
a PIN code. The scramble code can
minimize the chance of exposing the real
PIN code to others. Up to 24 digits can be
set with the scramble code.
An incorrect PIN code is entered for more
than 5 times consecutively, the lock will be
locked for 15 minutes. Press any button of
the keypad will activate the alarm.
1.Press [ ] button on the registered remote
control
2. Door is unlocked
Voice guide
“Verification Succeeded, door has been
unlocked”
3. Push down the handle to unlock the door
It can be used anywhere inside a door given
that the working distance is within 20-30m.
(working distance can vary depending on the
environment)
3-19 Open a Door From Outside
Components
How to Use
Name of Parts
Product Specification
Trouble Shooting
To Next Page
Loading...
