Hande 7.5
Front axle
Hande 7.5
Rated axle
load
7500 kg
Brake Size 410 mm x 160 mm
Steering Mechanical steering arm
Rear axles
Hande 11.98
Rear axle Hande 11.98
Rated axle
load
16 000 kg
Drive flange 180 mm
Final drive
ratio
11.98:1
Track width 1860 mm
Brake size 420 mm x 185 mm
Brakes
Operating
principle
Pneumatic spring brake chamber actuates the
brake lever which turns the S-cam causing the
brake shoes to make contact with the brake
drum and generate brake torque.
Service brake Dual circuit drum brakes
Parking brake Spring-loaded drum brake at the rear axle,
controlled with an electric switch in the cab.
Steering
Hydraulic power assisted steering
Steering
system
Hydraulic power assisted steering with
mechanical backup.
Suspension
Front axle Leaf springs, attached with pivot pins to the
tractor frame and with clamps to the axle.
Rear axle On the standard tractors, the rear axle is bolted
rigidly to the tractor frame.
F Technical data – Specifications and dimensional drawing 5
TL2 Maintenance Manual
591 003 Default
To Next Page
Loading...
