Need help?Do you have a question about the Kalmar TL2 and is the answer not in the manual?
General guidelines and precautions for performing maintenance safely.
Specific safety instructions for service position, depressurizing systems, and personal protective measures.
Overview of the maintenance program including initial and scheduled maintenance intervals.
Maintenance procedures to be performed at specific hour intervals (500, 1000, 2000 hours).
Instructions and general work procedures for identifying and locating faults in the system.
Procedures for replacing the fuel filter, including safety precautions.
Inspection and maintenance of engine components like fan hubs, drive belts, and vibration dampers.
Examination of charge-air cooler, piping, air intake piping, and air compressor.
General information, procedures for examining and changing coolant, and radiator/hose checks.
Instructions for changing transmission oil and examining oil level (cold/hot).
Procedures for measuring brake lining thickness, adjusting slack adjusters, and lubricating s-cams.
Examination of the steering system, including tie rod assembly and axle bearings.
Instructions for measuring and adjusting the front wheel toe-in.
Table of engine error codes (Cummins) with SPN and FMI identifiers.
Table of transmission error codes with diagnostic and code descriptions.
To Next Page
General