B Safety
General safety instructions
General
Everyone performing maintenance and adjustment procedures on
the machine must follow the safety instructions included in this man‐
ual.
Maintenance must be carried out only by professional and trained
personnel.
Training on maintenance and occupational safety issues can be
ordered from our service centre if necessary.
Remember:
•
Follow the safety instructions included in this manual.
•
Obtain the training required by the job and, if necessary, ask
your work instructor for guidance on the issues regarding
safety at work.
•
Follow local laws, safety instructions, and regulations.
•
Do the job with equipment and tools that you have been trained
to use safely and properly.
•
Always stop the engine before commencing maintenance or
adjustments.
•
Do not smoke or use an open flame when refueling or servicing
the fuel system.
•
Avoid skin contact with oils and lubricants. Use protective
gloves when handling oils and greases during maintenance.
•
When working, use suitable protective clothing, which does not
easily get caught in the machine components and which pro‐
vides good protection against oil and liquid splashes during
maintenance.
•
Work carefully but efficiently, and do not take any risks.
In this publication, Cargotec Oy has documented and warned about
situations and risks that may occur in connection with operation as
well as service and repairs of the machine under normal conditions.
Therefore, it is very important that all persons working with the
machine acquaint themselves with and act according to the informa‐
tion in the maintenance manual and the operator's manual.
B Safety – General safety instructions 3
TL2 Maintenance Manual
591 003 Default
To Next Page
Loading...
