C Preventive
maintenance
General
Follow our maintenance programme carefully to make sure that the
operational safety and reliability of the machine are maintained at
the intended level.
The maintenance programme specifies the inspection and mainte‐
nance procedures as follows:
•
Daily inspections
•
inspections to be performed every day
•
Initial maintenance
•
maintenance after first 150 hours of operation
•
Scheduled maintenance
•
maintenance procedures performed after 500, 1000 and
2000 hours of operation
•
Lubrication
•
greasing of lubrication points at defined intervals: 250
hours of operation without central lubrication; 500 hours if
the machine is equipped with central lubrication
IMPORTANT
Maintenance and adjustment procedures must be carried out only
by professional and trained personnel.
To meet the terms and conditions of the warranty agreement, use
only recommended fluids and original equipment and spare parts
available from our spare parts department.
Following the maintenance programme defined in this maintenance
manual is a prerequisite for maintaining the machine warranty.
For the service personnel
General
The maintenance instructions provide the service personnel with
information about the mechanisms and maintenance items of the
machine as well as guidelines for safe maintenance.
Familiarise yourself with the operation of the machine, the mainte‐
nance programme, maintenance items, and work instructions.
Always follow the maintenance instructions.
For regular maintenance, use the oils, greases, and fluids specified
later in this manual and the filters and other service parts available
from our spare parts department.
Absolute cleanliness should be observed especially during regular
maintenance of the hydraulic and fuel systems to to make sure that
the operation of the machine is reliable.
C Preventive maintenance – For the service personnel 3
TL2 Maintenance Manual
591 003 Default
To Next Page
Loading...
