Maintenance programme
Initial maintenance
Maintenance table
General
Maintenance item Reference
Checking the fluids, oil, and for compressed air leaks
1 Engine
Maintenance item Reference
Change oil and replace oil filters see:
1.8 Lubrication system
Examine coolant level and quality of antifreeze mixture see:
1.7 Cooling system
Examine the condition and tightness of the belts see:
1.5 Mechanical components of the engine
2 Transmission
Maintenance item Reference
Tightening the transmission mounting screws see:
2.3 Mechanical transmission
Change transmission oil see:
2.6 Lubrication system
Replace the transmission oil filters see:
2.6 Lubrication system
3 Driveline/Axle
Maintenance item Reference
Examine the universal joints and tighten the mounting see:
3 Driveline / axle
Change the wheel hub oil see:
3 Driveline / axle
4 Brakes
Maintenance item Reference
Examine and, if necessary, adjusting the brake system see:
4 Brakes
C Preventive maintenance – Maintenance programme 5
TL2 Maintenance Manual
591 003 Default