Kamstrup MULTICAL 601 - Page 23

Consumed energy in kWh, MWh or GJ Consumed district heating water Number of operating hours
Latest yearly target date Energy consumption count on latest yearly target date, followed by previous yearly target date. Followed by monthly target date data Latest yearly target date District heating water volume count on latest yearly target date, fol- lowed by previous yearly target date. Followed by monthly target date data
Current flow pipe temperature (*) Press to see yearly
and monthly average values
Current return pipe temperature (*) Press to see yearly
and monthly average values
Current temperature difference Current water flow (*) Press to see the
peak value of the cur- rent year and historic yearly and monthly values
Current heat power (*) Press to see the
peak value of the cur- rent year and historic yearly and monthly values.
Followed by the
accumulated water consumption on inputs A and B and tariff registers TA2 and TA
Indication of the number of current and corrected error conditions Data logger indicates the date … … and the INFO code of the latest 36 changes
Current information code (contact the utility if the figure differs from ”0”)