3Kamstrup A/S • 55122070_A2_GB_07.2017
MULTICAL® 603
Contents
1 General information 4
2 Mounting of temperature sensors 5
2.1 Short direct sensor (DS) 5
2.2 Pocket sensor (PL) 6
3 Mounting of flow sensor 7
3.1 Mounting of couplings and short direct sensor in flow sensor 7
3.3 Mounting of ULTRAFLOW® 54 ≥ DN150 8
3.2 Mounting of ULTRAFLOW® ≤ DN125 8
3.4 Flow sensor position 9
3.5 Installations with two ULTRAFLOW® sensors 10
4 Mounting the calculator 11
4.1 Compact mounting 11
4.2 Wall-mounting 11
5 Electrical connection 12
5.3 Cable Extender Box 12
5.4 Electrical connection of Pulse Transmitter 12
5.1 Connection of temperature sensors 12
5.2 Connection of ULTRAFLOW® 12
5.5 Connection of other flow sensors 13
5.7 Internal communication 13
5.6 Connection of power supply 13
6 Testing of function 14
7 Information code 15
8 Communication Modules 16
8.1 Module overview 16
8.2 Pulse inputs 16
8.3 Pulse outputs 17
8.4 Data + pulse inputs, type HC-003-10 17
8.5 Data + pulse outputs, type HC-003-11 17
8.6 M-Bus + pulse inputs, type HC-003-20 18
8.7 M-Bus + pulse outputs, type HC-003-21 18
8.8 M-Bus + Thermal Disconnect, type HC-003-22 18
8.9 Wireless M-Bus + pulse inputs, type HC-003-30 19
8.10 Wireless M-Bus + pulse outputs, type HC-003-31 19
8.11 Analog outputs, type HC-003-40 19
8.12 LON FT-X3 + 2 pulse inputs, type HC-003-60 20
8.13 BACnet MS/TP + 2 pulse inputs, type HC-003-66 20
8.14 Modbus + pulse inputs, type HC-003-67 20
9 Set-up via front keys 21
To Next Page
Loading...
