18 KANE 458s MANUAL
USING YOUR ANALYSER
COMBUSTION TESTS
Insert your ue probe tip into the centre of the ue. Readings will settle
within 60 seconds assuming boiler conditions are stable.
Rotate dial to “Ratio” to display:
RATIO DISPLAY
Fuel type – can be changed via “Menu”
or STATUS setting
CO/CO2 ratio
Carbon monoxide (ppm)
Carbon dioxide (%)
Excess air %
Pressure reading
Press button to send a full combustion test to our optional KANE
IRP-2 printer or KANE’s App via Wireless module.
Press & hold button for 2 seconds to log a full combustion report.
Page 21 explains how to view & print stored reports.
To Next Page
Loading...
