Kane 458s - MEASURING FLUE GASSES

16 KANE 458s MANUAL
Make sure you do not exceed the analyser’s operating specications. In
particular:
• Do not exceed the ue probe’s maximum temperature (600°C)
• Do not exceed the analyser’s internal temperature operating range
MEASURING FLUE GASSES
After the countdown is nished and the analyser is correctly set up, put
its ue probe into the appliance’s sampling point. The tip of the probe
should be at the centre of the ue. Use the ue probe’s depth stop cone
to set the position.
With balanced ues, make sure the probe is positioned far enough into
the ue so no air can “back ush” into the probe.
WARNING
Ensure the ue probe handle does not get hot!
MAIN MENU SUB MENU OPTIONS/COMMENTS
SCREEN
CONTRAST Factory setting is 14
BACKLIGHT 0 to 300 secs
AUX
Enables users to customise the
parameters on the AUX display: LINE 1,
LINE 2, LINE 3, LINE 4, LINE 5, LINE 6,
BACK
BACK