Kane 458s - KANE 458 S OVERVIEW

4 KANE 458s MANUAL
KANE 458s OVERVIEW
Your KANE458s combustion analyser measures:
● Carbon Monoxide (CO)
● Carbon Dioxide (CO₂)
● Oxygen (O2) if tted
● Nitric Oxide (NO) if tted
● Dierential Pressure
● Dierential temperature
Your KANE458s measures CO2 using KANE’s unique NDIR sensor.
Always use fresh outdoor air to “zero” your analyser during the initial
countdown or when prompted to “ZERO CO” as indoor CO2 levels are
increased by human activity.
This applies even if your analyser measures O2 instead of CO2 as it is
best practice to use fresh, outdoor air during initial countdown to protect
you from unsafe levels of CO and CO2 possibly present in the room.
Depending on your options these parameters are calculated:
● Oxygen (O2)
● CO/CO₂ ratio
● Carbon Monoxide (CO₂)
● Combustion Eciency
● Losses
● Excess Air
● Dierential Temperature
Your analyser also measures CO levels in ambient air – useful when a
CO alarm is triggered – & performs a Room CO test for up to 30 minutes.
Your KANE458s has a structured Commissioning Test to help install boilers.
Your KANE458s has a protective rubber cover with magnets for
“hands-free” operation and is supplied with a ue probe with integral
temperature sensor.
Your analyser has a low ow detector to switch o the analyser’s pump
if it detects an over lled water trap.