Kane KANE458s - Battery Charger & Batteries; Battery Charger and Battery Information Reference; System Leak Test; Performing a System Integrity Leak Test

See section 4, page 12
Your analyser can perform a system integrity test ensuring no sampling
system leaks when you connect a combustion probe & cover probe tip to
ensure air tight seal.
To perform, rotate dial to MENU
Select UTIL pressing or & ENTER
Select LEAK pressing or & ENTER
Follow analyser instructions to connect and block probe
Select NEXT pressing ENTER
Your analyser now performs test then indicate pass or fail
16.3
BATTERY CHARGER & BATTERIES
16.4
SYSTEM LEAK TEST
KANE458s MANUAL 41