Kane KANE458s - Menu Choices; Time, Date, and Header Configuration; Printer Type, Gas Scale, and O2 Reference Settings

18 KANE458s MANUAL
7.1
MENU ITEM MENU TEXT OPTIONS / COMMENTS
TIME TIME
Select TIME to set analyser time - Press
ENTER then use or & ENTER to set
correct HH:MM:SS
DATE
DATE
Select DATE to set analyser date - Press
ENTER then use or & ENTER to set
To set correct DD:MM:YY
HEADER HEADER
Select HEADER to personalise 2 lines of 24
characters - Press ENTER, select line to edit
pressing & to select LINE 1 or LINE 2.
Use & to select correct character then
press ENTER
To set HEADER via KANE LIVE app, select
CONTROLS on app, select ANALYSER
HEADERS, select LINE to edit
Select SAVE to set header
PRINTER TYPE PRINTER TYPE
Select IR PRINTER to set infrared printer -
press ENTER then use or & ENTER to
select KMIRP or IRP-2/3
GAS SCALE GAS SCALE
Select GAS UNIT by pressing ENTER then
select gas scale ppm, mg/m3 or mg/kWh
using or & ENTER
O2 REF
O2 REF
Select O2 REF to set % reference O2 for
each gas measured - Press ENTER then
select gas using & then ENTER.
Change % reference O2 by pressing or
then press ENTER to confirm
MENU CHOICES