Kantech KT-1 - Trouble and Reporting; Automatic Port Detection; Downloadable Firmware; Integration Interface

To Next Page

To Previous Page

Integration Interface

The KT-1 supports alarm panel interfacing with the appropriate connections made

between zone inputs, relay outputs and the alarm system panel. The KT-1-PCB ver-

sion also supports integration interfacing using RS-232 for fire alarm panel and intru-

sion integrations.

Note: RS-232 interface communication with fire alarm panel has not been eval-

uated by UL.

Automatic Port Detection

The KT-1 automatically detects the site communication speed set by EntraPass as

well as the communication port which can be IP (ETHERNET) or RS-485 (COM1).

Downloadable Firmware

The firmware program can be downloaded from any EntraPass workstation to the

KT-1. It is stored in the controller’s flash memory, and is upgraded without having to

change any parts.

Trouble and Reporting

The KT-1 continuously monitors its power and reports low and critical power issues.

Power outputs are monitored and electronically protected against short-circuits

and surges. Locking devices are also monitored for short and open circuits.

Other manuals for Kantech KT-1