Technical Specifications
Type Description
DC Power input
11.3VDC- 14VDC, 1.5A Note: Compatible with KT-PS4085
Power supply module. Recommended plug-in adapter model
PTC1640UG. Standby power: 12V/7Ah battery, provides 4h of
battery backup
PoE 13W, 1A *(See note below)
PoE+ 25.5W, 1.9A *(See note below)
Operating Temperatures
For UL listed installations: 0°C to 49°C (32°F to 120°F) indoor
use only For European compliant installations: -10°C to 55°C
(14°F to 131°F) Environmental Class II
Humidity Level 93% max. (relative humidity non-condensing)
Cabinet dimensions: KT-1
From wall surface (Width x Height x Thickness) 3.4” x 5.125”
x 1.81” (2.4” overall thickness)
Cabinet dimensions: KT-1-
PCB
4.78'' x 5.436'' x 1.863''
Weight: KT-1 10.75 ounces (305g)
Cabinet Weight: KT-1-PCB 13.93 ounces (395g)
Reader types
Wiegand, proximity, ABA Clock and Data, bar code, magnetic,
integrated keypad, smartcard and others
Reader power output 12 VDC 500 mA max, protected and supervised 룈
Monitored points (zone
inputs)
4 monitored points (Z1 to Z4), NO/NC without EOL (DRY),
single EOL, double EOL and 1 fixed-function tamper input
Points maximum wiring
AWG #22 - 600 m (2,000 ft)
For specifications for maximum wiring for readers, refer to
the associated installation manuals of the respective read-
ers.
Door strike power super-
vised
750 mA for one output or 1.0 A total (in PoE 13W, 375 mA
each or 750 mA total).
Lock outputs can only detect short-circuit fault, not open-cir-
cuit fault.
Auxiliary reader outputs
LEDs (LED, OUT1 and OUT2) and buzzer (BUZ), 25mA max
each, open collector outputs
Relay controlled output:
KT-1
2 open collector outputs, 100 mA each
© Copyright, 2016, all rights reserved
25
To Next Page
Loading...
