27
2) Choose Enabled or Disabled in the pull-down menu, click Confirm button to save the
change.
Logo Customization
You can upload your own logo which shown in the idle screen.
1) Prepare the desired the logo file which is
--in BMP format,
--max pixels: 236*82,
--can only be monochrome with 2 gray scales at most.
2) Run PictureEXDemo.exe, choose Add button->choose the specific logo file->click
Convert, and then close the software.
3) A new-built folder named adv with a .dob file will be created.
4) Choose Phone-> Features-> Use Logo via the Web interface, press Browse button, and
choose the .dob file just created by the software.
5) Press Upload button to complete the Logo Customization. You will find the desired logo
shown on the idle screen.
Note:
1. Please contact with your system administrator or service provider for the software with
PictureEXDemo.exe.
2. You can also upload the Logo by AUTO PROVISION.
3. By the Web interface, users can set a logo to be a System Logo or a Custom Logo, and the
Custom Logo is deletable.
Programmable Key
The hot-key, navigation keys and function keys on the keypad are editable. Users can
customize specific features for these keys according to their actual needs. (The
programmable keys can only be available when the phone is idle.)
This function can only be set via the Web interface:
1) Choose Phone->DSS Key->Programmable Key.
2) Choose and customize specific features for these keys.
3) Click Confirm button to save the change.
Live Dialpad
Defines whether to dial out the dialed number automatically.
This function can only be set via the Web interface:
1) Choose Phone->Preference->Live Dialpad.
2) Enable or disable it in the pull-down menu.
3) Click Confirm button to save the change.
To Next Page
Loading...
