16
2) Use the Switch hot key to choose a preferred time format: 12 hour or 24 hour.
3) Use the Switch hot key to choose a preferred date format, the IP phone can support 7 kind
of date display format.
4) Press the Save hot key to save the changes and return to the previous screen.
To change the Time and Date via the Web interface:
Choose Phone->Preference to do the relating changes. You can also change the Update
Interval which specifies the time frequency that the phone refreshes the time automatically.
Please refer to the instruction above for the parameters’ detail.
To change the Daylight Saving Time Settings via the Web interface:
1) Choose Phone->Preference->Daylight Saving Time to do the relating changes.
2) Choose Enable option, then you can set the Daylight Saving Time automatically.
3) Choose Automatic. There is a table named as AutoDST.xml has been saved in the
configuration file, If the table includes daylight saving time of your time zone, it will show the
Fixed Type: By Date or By Week. And the daylight saving time is unchangeable, unless to
update the AutoDST.xml via auto provision.
Note:
By default the time zone is +8 China(Beijing), Daylight Saving Time is
Automatic.
Keypad Lock
You can lock the keypad of your phone when you are temporarily not using it. This function
helps you to protect your phone from unauthorized use. You can lock the following specific
keys:
To Next Page
Loading...
