51
Intercom
You can configure the key for Intercom mode and is useful in an office environment as a
quick access to connect to the operator or the secretary.
To assign the key as Intercom:
1) Choose Phone->DSS Key->Memory or Line Key, choose one of the keys you want to
make the assignment, there is a pull-down menu in the Type field, choose Intercom from the
list.
2) In the "Line" field, select a line for which to apply this key, the default one is Line 1. And
enter the extension number you want to intercom.
3) Press Confirm button to save the changes.
Note:
Your VoIP PBX must support this feature. And make sure the intercom extension enables
the Auto-answer function.
URL Record
Pressing the type of DSS key, it will start a conversation or create a conference call, and
then follow the voice prompts to achieve the call recording capability.
1) The URL Record function can only be active when there is only one call under the
conversation. When you are on a conversation, pressing the DSS key to start the recording
process.
2) Enable the recording function, the recording icon will be flashing for the ongoing recording
process.
3) Pressing the DSS key again to disable the recording function, and the flashing recording
icon will be disappeared simultaneously.
4) Follow the voice prompts to listen to the recording.
To assign a DSS key as URL Record:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the keys you want to
make the assignment, there is a pull-down menu in the Type field, choose URL Record from
the list.
2) In the "Line" field, select a line for which to apply this key, the default one is Line 1. And
enter the condition code in the Expansion field.
3) Press Confirm button to save the changes.
Note:
During a conversation, press this type of DSS key to start the recording process; if the other
party hung up, your phone will turn to the idle status.
To Next Page
Loading...
