47
Power on + Weekly and Disabled.
Scheduling
You can specific the period in days which the phone checks and updates
the new firmware, the range is 1-30 days.
Note:
1. Any power interruption during the following process will most likely lead to a flashmemory
error. As a result the system cannot boot up anymore. The procedure can be only conducted
in Administrator Mode.
2. If the updating is failed, you can re-plug the power adaptor, and press the Speakerkey for
3 seconds, the IP phone will enter the account configuration interface. Users canreconfigure
the IP phone account information here, then press the OK button to save thechanges.
3. The upgrade priority is PNP, Custom Option, URL by descending.
4. Users can also delete some configuration options by Auto-provision, for example, todelete
the admin password.
To Next Page
Loading...
