KaVo ABSORmatic plus - Page 22

20
ABSORmatic
®
plus.
Example 1:
3 Technical-Workplaces
Adjustments WP1, WP2 and WP3:
Suction power = 24 suction unities
Optimum = no
Identification = Current
Correspond to factory setting, all three
workplaces are in operation at the same
time
Example 2:
Suction line 1 = Model-Dry-Grinder
Suction line 2 = Sandblaster
Suction line 3 = Technician-
Workplace
Adjustments WP1
Suction power = 72 suction unities
Optimum = Yes
Identification = Current
Adjustments WP2
Suction power = 36 suction unities
Optimum = Yes
Identification = Current
Adjustments WP3
Suction power = 24 suction unities
Optimum = Yes
Identification = Current
If the Modelgrinder is into operation (WP1)
automatically Sandblaster (WP2) and
Technician-Workplace (WP3) are blocked.
If Sandblaster (WP2) is into operation, the
Technician-Workplace (WP3) can be
linked. The Modelgrinder is blocked.
Example 3:
Suction line 1 = Model-Dry-Grinder
Suction line 2 = Sandblaster
Suction line 3 = Technician-
Workplace
Adjustment WP1
Suction power = 72 suction unities
Optimum = no
Identification =Current
Adjustment WP2
Suction power = 36 suction unities
Optimum = = no
Identification = Current
Adjustment WP3
Suction power = 24 suction unities
Optimum = = no
Identification = Current
Modelgrinder (WP1), Sandblaster (WP2)
and Technician Workplace (WP3) can be
operated at the same time.
The suction power can drop below the
adjustment value.