KaVo ABSORmatic plus - 9.20 Installing the waste bag

26
ABSORmatic
®
plus.
9.20 Installing the waste bag  for dust-
free removal of the contents of the filter.
Remove the front panel  and with draw
the stainless steel slide  under the base of
the waste container. Press down the locking
lever  of the waste container.
Insert the stainless steel slide  above the
waste container  in the “upper parking
position“ in the groove provided (must
come flush against the seal). Remove waste
container .
Place waste bag  in the waste container
 and press it against the base and sides of
the container. Lay the protruding material
in the double edge of the container. Press
the waste bag  against the contours of the
waste container to keep trapped air to a
minimum. Place cardboard insert (accesso-
ry disposal set Mat.-No. 0.657.0951) at
bottom of container and clamp.
Reinsert waste container  with waste bag
into the dust collector, withdraw the stain-
less steel slide  while pressing it upwards
against the rubber seal and refix the waste
container by pressing the locking lever 
upwards. Insert the stainless steel slide ,
after having cleaned it under running water,
into the “lower parking position“ (under
waste container).
Refit the front panel #.
A
B
S
O
R
m
a
t
i
c
®
A
B
S
O
R
m
a
t
i
c
®
A
B
S
O
R
m
a
t
i
c
®
A
B
S
O
R
m
a
t
i
c
®
A
B
S
O
R
m
ati
c
®
A
B
S
O
R
m
a
t
i
c
®
#



Í
Í
Í
