19
Operating Instructions KBL 3500
Operation in tanning mode
DANGER
Excessive dose of UV radiation
If the UV radiation of the facial tanner is not properly
fi ltered, or if the tanning session is prolonged excessively,
the skin and the eyes will be damaged severely.
Never operate the sunbed with a defective fi lter pane.
Carry out visual inspections regularly!
Never operate the sunbed with a defective timer.
Observe the tanning times given in the tanning schedule.
•
•
•
Tanning starts automatically after the warm-up time specifi ed in the
timer has elapsed. During the warm-up time, the tanning session
can be started manually by pressing the START button.
Displays in tanning mode
During the tanning session, the tanning time so
far is diplayed as Minutes : Seconds. If the display
fl ashes, the session has been suspended.
If you press the
next
button or one of the
plus/
minus
buttons in standby mode or during tanning,
the available functions are displayed. The
settings can only be changed during the tanning
session. The KBL display or the tanning time is
shown either when the
next
button is pressed,
or automatically after approx. 10 seconds.
Tanning timeTanning time
Functions of
display 1
Functions of
display 1
To Next Page
Loading...
