KBL 3500 - Playing Music All the Time or Only During Tanning; Default Setting of Audio Source; Default Setting of Volume

29
Operating Instructions KBL 3500
Playing music all the time or only during tanning
Via this setting you determine when the music is played. If the sunbed
is not equipped with an audio system, this item is irrelevant.
Move the selection bar to the menu item NonStopMus.
Determine the desired setting via + or - .
disabled: The music is played only during tanning.
enabled: The music is played during tanning and in standby mode.
Save via STORE.
Default setting of audio source
Via this setting you determine which audio source is used when
tanning starts. If the sunbed is not equipped with an audio system,
or the studio does not have hi-fi equipment, this item is irrelevant.
Move the selection bar to the menu item Def.Src..
Determine the desired setting via + or - .
Line In: Studio music is the default audio source.
MP3 Player: The MP3 player is the default audio source.
Save via STORE.
Default setting of volume
Via this setting you can determine at which volume the
music is played by default. You can specify different volumes
for the tanning and standby modes. If the sunbed is not
equipped with an audio system, this item is irrelevant.
Move the selection bar to the menu item Def.Vol.H..
Set the desired volume via + or - .
The levels 0 - 9 correspond to the levels in tanning mode.
Save via STORE.
Move the selection bar to the menu item Def.Vol.C..
Set the desired volume via + or - .
The levels 0 - 9 correspond to the levels in tanning mode.
Save via STORE.
1.
2.
3.
1.
2.
3.
1.
2.
3.
1.
2.
3.
Volume for the
tanning mode
Volume for the
tanning mode
Volume for the
standby mode
Volume for the
standby mode