KBL 3500 - Cleaning;Replacing the Fi Lter Panes and Replacing the Lamps of the Facial Tanner

43
Operating Instructions KBL 3500
If necessary, clean the interior of the bed with a slightly damp cloth. The
electronic components under the bed must not be subjected to humidity.
When cleaning the tubes, use warm water and a chamois. Do
not use any aggressive or alcoholic cleansing agents.
When installing fresh tubes, replace the starters fi rst.
Installing the tubes: Make sure that the inscription on the
tubes is visible, or else there will be no tanning effect.
Assembly is performed in reverse order.
Reset the counter for the power-on hours of the tubes in
the service menu (Roehr.Std/poh tubes).
Cleaning/replacing the fi lter panes and
replacing the lamps of the facial tanner
Fold up the canopy of the sunbed.
Undo the 3 screws that fi x the pane to the canopy in the front area. To
undo the screws, a quarter turn to the right will do - they are quick-release
fasteners. The cover with the screws folds down.
Put a cushion, a rolled-up towel or something similar
on the bed pane to protect it against scratches.
6.
7.
8.
9.
10.
11.
1.
2.
3.