27
Operating Instructions KBL 3500
Resetting the power-on hours of
tubes and facial tanners
POH Tubes and POH Burner show the power-on hours
(operating hours) of tubes and facial tanner (burner). These
values must be reset to zero after a tube/lamp replacement.
Move the selection bar onto the menu item POH Tubes or POH Burner.
Reset the value to zero via - .
Store via STORE .
Number of tanning sessions
The menu item Sunbaths shows the accumulated number of all
tanning sessions performed so far. This display serves statistical
purposes. For example, the average duration of a tanning session
can be computed that way. This value cannot be reset to zero.
Changing the language and country settings
You can change the language and country settings in the service menu
in such a way that the menu items are displayed in German or English.
Move the selection bar to the menu item Sprache/Language.
Choose the desired language via the
plus
and
minus
buttons.
Move the selection bar to the menu item Land/Country.
Choose the desired country via the
plus
and
minus
buttons.
Save the settings via STORE.
Adjusting the contrast of the display
You can adjust the contrast of the display to adapt the display
optimally to the lighting conditions of the environment.
Move the selection bar to the menu item Contrast .
Change the setting via + or - .
Save via STORE .
1.
2.
3.
1.
2.
3.
4.
5.
1.
2.
3.
To Next Page
Loading...
