KBR multicomp F144-MS-1V1C1TI6DO6RO-3 - Page 21

Rev. 1.00
22586_EDEBDA0253-0318-1_EN
21
KBR multicomp F144-3 6DO/6RO
In the Commissioning programming menu, the phase allocation can be
changed using the functions Rot. eld U and Rot. eld I (provided that there is
no generator in operation at the time).
The rst switching operation may take up to 180seconds. The stages are
switched in set intervals until compensation occurs. The displayed cos phi must
increase to at least the set target cos phi.