KEB COMBIVERT F5 Series Installation Guide & Operation Manual

42
When switching on the KEB COMBIVERT F5, the value of parameter CP.1
appears in the operator display. (see "Drive Mode" to switch the keypad
function)
The function key (FUNC) changes between the parameter value and
parameter number.
With UP and DOWN, the value of the parameter number is increased/de-
creased.
Password Input
FUNC.
SPEED
START
FUNC.
SPEED
ENTER
F/R
FUNC.
SPEED
START
FUNC.
SPEED
ENTER
F/R
Releasing the
CP-Parameters
Locking the
CP-Parameters
(Read only)
From the factory, the frequency inverter is supplied without pass-
word protection, this means that all parameters can be adjusted.
After programming, the unit can be protected against unauthorized
access thus preventing the values from being changed.
Quick Reference
Parameter Display
FUNC.
SPEED
START
STOP
START
STOP

KEB COMBIVERT F5 Series Specifications

General

Control Method	Vector Control, V/f Control
Protection Class	IP20
Protection Features	Overcurrent, overvoltage, undervoltage, short circuit, overtemperature
Communication Interfaces	CAN, PROFIBUS, Modbus RTU
Cooling Method	Fan Cooled
Relative Humidity	Up to 95% (non-condensing)