KEB COMBIVERT F5

GB - 3
Table of Contents
1. Safety and operating instructions ..... 4
2. Produktbeschreibung ......................... 5
2.1 Verwendungszweck............................... 5
2.2 Geräteidentikation ............................... 5
2.3 Technische Daten .................................. 6
2.3.1 230 V-Klasse .......................................... 6
2.3.2 400 V-Klasse .......................................... 7
2.4 Abmessungen und Anschlüsse ............. 8
3. Installation and Connection ............... 9
3.1 Control cabinet installation .................... 9
3.2 EMC-conform Installation ...................... 9
3.3 Connection of Power Circuit ................ 10
3.3.1 Terminal Strip X1A ............................... 10
3.3.2 Wiring instructions ............................... 10
3.3.3 Mains connection ................................11
3.3.4 Motor connection ................................. 12
3.3.5 Connection of the temperature monito-
ring ...................................................... 12
3.3.6 Connection of a braking resistor with re
prevention............................................ 13
3.4 Control Board Basic ............................ 14
3.4.1 X2A Control terminal strip.................... 14
3.4.2 Connection of the control terminal strip ...
15
3.5 Control board Compact/General/Appli-
cation without encoder interface.......... 16
3.5.1 X2A Control terminal strip.................... 16
3.5.2 Connection of the control
terminal strip ........................................ 17
3.6 Control board Multi/Servo/Application
with encoder interface ......................... 18
3.6.1 X2A Control terminal strip.................... 18
3.6.2 Connection of the control
terminal strip ........................................ 19
4. Operation of the Unit ......................... 20
4.1 Operation Accessories ........................ 20
4.1.1 With HSP5 cable and without operator 20
4.1.2 Digital operator (part number 00F5060-
1100) ................................................... 20
4.1.3 Interface operator (part number
00F5060-2000) .................................... 20
4.1.4 Remote control ................................... 21
4.1.5 Other operators ................................... 21
4.2 Keyboard Operation ............................ 21
4.2.1 Parameter numbers and values .......... 21
4.2.2 Resetting error messages ................... 22
4.2.3 password input .................................... 22
5. Parameter Descriptions .................... 23
5.1 Basic/Compact/General/Application
without encoder interface .................... 23
5.2 Parameter description for Multi and
Application with encoder interface....... 29
5.3 Parameter description for F5 servo ..... 33
Annex A ........................................................ 37
A.1 Overload characteristic........................ 37
A.2 Calculation of the motor voltage .......... 37
A.3 Maintenance ........................................ 37
A.4 Storage ................................................ 38
A.5 Changing the response threshold of the
braking transistor ................................. 39
B. Annex B .............................................. 40
B.1 CE-Marking ......................................... 40
B.2 UL Marking .......................................... 40
B.3 Additional Manuals .............................. 43