81
D o ’s a n d d o n ’ t ’s
Allowed
1、 Disassemble and install by professional tools
2、 Install oil seal by professional tools
3、 Keep the free clearance of the brake arm and control bar
of oil value
4、 Keep chain’s sucitable degree of loop and lubricate it in
demand
5、 Use lube commended to lubricate the parts appointed
6、 Drive chain wheel、driven chain wheel、chain should be
replaced all
7、 Ttubing bearing should be replaced all
8、 Keep the aerate tubes no backup、curly、bend、all the tubes
should keep expedite
9、 Keep air pressure of tire commended
Front wheel 6-8psi
Rear wheel 6-8psi
Unallowed
1、 The brake toe abrations rear to the abration mark,
aontinuing using is unallowed.
2、 Pin、seal、whasher is unallowed to used repeated
3、 Don’t replace the broken chain in delay. Change it as soon
as it is broken.
4、 Don’t start the motor without installing the muffle.
To Next Page
Loading...
