KEEWAY ATV250 - Badness in High Speed; Hard to Operate

88
5. Check if the carburetion blocked -block in oil duct of carburetion
Is blocked -block of carburetion muzzle
Expedite
·Badness in high speed
Badness in high speedBadness in high speed
Badness in high speed reasons possible
reasons possiblereasons possible
reasons possible
1. Check ignition incorrect -malfunction of C.D.I.
- malfunction of spring loop
Correct -wrong fixing of spring loop
2. Disconnection of throttle of fuel -lacking of fuel
Oil tube of carburetion -block of oil tube
Fuel goes fluently -block of oil filter
-block of filter net
-block of intake hole of tank
3. Check if muzzle of blocked -block of jet of carburetion
Carburetion is blocked
Expedite
4. Check the physic incorrect -wrong fixing of timing
Position of in taking
Correct
5. Check air valve too loose -malfunction of air valve
Spring
Normal
·hard to operate
hard to operatehard to operate
hard to operate
1. Turn hardly -adjusting nut of turning bearing is
Tight
-abration of turning head bearing
2. Just one wheel swings -wheel bearing jumps excessively
-rim bends
-nut of rocker bearing cushion is
Loose
-Abration of rocker bearing cushion
-blanket bends
3.ATV turns over one side -type leaks at side