Kemper 330 - Scrapers on gathering drums

Service
KM00321,000029B 1924FEB104/4
Scrapers on gathering drums
To avoid obstructions in the feeding area, this area must
be free from contamination.
The distance between scraper ends (A) and drum wall (B)
must be as narrow as possible. A maximum distance (X)
of 5 mm (0.2 in.) must not be exceeded.
All scrapers can be adjusted as follows:
Loosen attaching screws, then slide scrapers within their
attaching bores to obtain the specified dimension (X).
IMPORTANT: Reinstall all panels removed for
adjustment purposes.
NOTE: Some attaching screws are accessible after
having removed the panels. Other attaching
screws (C) are directly accessible from the
front side of the gathering drum.
A—Scraper end
B—Drum wall
C—Attaching screws
X—5 mm (0.2 in.)
ZX1040658 —UN—12APR07ZX1040584 —UN—12APR07ZX1040585 —UN—12APR07ZX1040586 —UN—12APR07
5010
040810
PN=105