Kemper 330 - Table of Contents

Contents
Page
Predelivery Inspection
Predelivery Checklist ....................................CLIST1
Delivery Checklist .........................................CLIST1
Checklist for the First Harvest Season .........CLIST2
Identification View
Identification Views.............................................001
Safety
.......................................................... 051
Safety Decals
Pictorial Safety Signs..........................................101
Operator’s Manual..............................................101
Repair and Maintenance ....................................101
Rotary Harvesting Unit .......................................102
Rotating Blade ....................................................102
Folding Area—345, 360 and 375 Only ...............103
Rotating Drums...................................................103
Hydraulic System—345, 360 and 375 Only........104
Hanging Points ...................................................104
Haulage
Prepare the Rotary Harvesting Unit for
Haulage (Models 345 and 360)......................151
Install the Transport Pallet (Model 375 Only) .....151
Loading with a Crane..........................................152
Preparation of the Rotary Harvesting Unit
Unpacking...........................................................201
Remove Tensioner Strap (Models 345
and 360) .........................................................201
Remove Transport Pallet (Model 375 Only) .......201
Adapt Feed Plates to Feed Passage..................201
Attaching to a CLAAS Forage Harvester
Compatibility Chart (CLAAS Forage
Harvesters).....................................................251
Channel Width Adjustment .................................252
Improved Channel Width Adjustment .................252
Adjust Rotary Harvesting Unit Tilt.......................253
Adjust Play on Tilt Frame ...................................254
Attaching to CLAAS Forage Harvesters .............255
Connect Hydraulic Hoses ...................................257
Connect the Drive (Forage Harvester
Types 491 and 492) .......................................257
Page
Connect the Drive (Forage Harvester
Types 493 and 494) .......................................259
Replace CLAAS Tray with KEMPER Tray........2513
Attaching to NEW HOLLAND and CASE Forage
Harvesters
Prior to Attaching ................................................301
Compatibility Chart (NEW HOLLAND
Forage Harvesters) ........................................301
Compatibility Chart (CASE Forage
Harvesters).....................................................301
Install Mounting Rail ...........................................302
Install Front Jackstand........................................302
Channel Width Adjustment .................................303
Improved Channel Width Adjustment .................304
Attaching to NEW HOLLAND and
CASE Forage Harvesters...............................305
Lock Jackstands .................................................306
Connect Drive Shaft ...........................................306
Install U.J. Shaft Shields on Forage Harvester...307
Attaching to a KRONE Forage Harvester
Compatibility Chart .............................................351
Channel Width Adjustment .................................351
Install Front Jackstand........................................352
Attaching to KRONE Forage Harvesters ............353
Connect Hydraulic Hoses ...................................354
Connect Drive Shaft ...........................................354
Detaching the Rotary Harvesting Unit
Install Front Jackstand (Except on
Rotary Harvesting Units for CLAAS
Forage Harvesters) ........................................401
Detach Rotary Harvesting Unit ...........................401
Transport
Driving on Public Roads .....................................251
Close Safety Relief Valve (Rotary
Harvesting Units for CLAAS Forage
Harvesters Only) ............................................251
Accident Prevention............................................251
Locking/Unlocking Tilt Frame .............................252
Operation of the Rotary Harvesting Unit
Harvesting Unit Method of Operation .................301
Continued on next page
Original Instructions. All information, illustrations and specifications in this
manual are based on the latest information available at the time of publication.
The right is reserved to make changes at any time without notice.
COPYRIGHT © 2010
All rights reserved.
i
040810
PN=1