Lubrication and Maintenance
OUKM001,0000012 1915FEB051/1
KM00321,0000195 1910JUN091/1
Service Intervals
CAUTION: Before making any adjustments or
doing any service work, always:
Switch the machine off
Remove the key from the ignition
Wait until all the moving parts have
come to a standstill.
IMPORTANT: The intervals quoted here are for
average conditions. Adverse operating
conditions may make it necessary to apply
lubrication or carry out an oil change more often.
IMPORTANT: Replace any damaged parts.
Any screws that have worked loose must be
retightened to the proper torque.
Clean grease fittings before lubrication. Replace lost or
damaged grease fittings immediately. If a new fitting fails
to take grease, remove it and check whether the grease
passage is blocked.
Perform lubrication and maintenance work mentioned in
this section before and after every harvesting season as
well.
Transmission Oil
Use oil with a viscosity based on the expected air
temperature range during the period between oil changes.
Transmission oils must meet API Service Classification
GL5.
TS1653 —UN—14MAR96
451
040810
PN=86
To Next Page
Loading...
