Kemper 330 - Replace CLAAS Tray with KEMPER Tray

Attaching to a CLAAS Forage Harvester
KM00321,000026B 1925FEB101/1
Replace CLAAS Tray with KEMPER Tray
The curved CLAAS tray may impair material flow below
the feed rolls. This problem will be resolved by using the
straight KEMPER tray (A).
Installation:
Remove CLAAS tray, slide in straight KEMPER tray (A)
and attach it to support shaft (B).
NOTE: When harvesting grass, remove the KEMPER tray.
A—KEMPER tray
B—Support shaft
KM1001105 —UN—10FEB10
2513
040810
PN=38