Kemper 330 - Adjusting the Feed Bars (330, 345 and 360)

Operation of the Rotary Harvesting Unit
OUCC002,00027DD 1911OCT071/1
Adjusting the Feed Bars (330, 345 and 360)
Feed bar (A) pushes the stalks forward to improve crop
intake. Its height can be altered to suit crop conditions.
Depending on the crop height, central feed bar should
be set as high as possible.
IMPORTANT: Do not raise the feed bars so high that
they collide with each other in the transport
position. After adjustment, always carry out
a test folding to prevent damage.
A—Feed bar
ZX012943 —UN—26NOV97
360 RHU Feed Bar
3026
040810
PN=78