Kemper 330 - Adjusting the Feed Bars (375 from Construction Year 2010)

Operation of the Rotary Harvesting Unit
KM00113,000002B 1903NOV091/1
Adjusting the Feed Bars (375 from
Construction Year 2010)
Feed bars (A) and (B) push the stalks forward to improve
crop intake.
Height of central feed bar (A) can be altered to suit crop
conditions.
Depending on the crop height, set central feed bar (A)
as high as possible.
•
Central feed bar (A) can be set into different positions
by setting bolt (C) somewhere within slot.
CAUTION: Feed bars are springloaded by a
gas pressure spring (D). Pay attention when
adjusting the feed bars to avoid injuries.
A—Central feed bar
B—Lateral feed bar
C—Adjusting bolt
D—Gas pressure spring
KM1001029 —UN—02NOV09KM1001030 —UN—02NOV09KM1001031 —UN—02NOV09
3028
040810
PN=80