Kemper 330 - Loading with a Crane

Haulage
KM00321,0000264 1922JAN101/1
Loading with a Crane
CAUTION: Always use the hanging points
(see arrows). This will prevent the
machine from tipping.
Always use chains or straps that meet the
weight requirements of the rotary harvesting
unit (see Section Specifications).
Particular care must be taken when loading in this
way. Use additional securing chains, if necessary.
When loading the rotary harvesting unit with a crane, use
chains or straps with the correct length as shown in the
illustration.
A—1400 mm (4 ft. 7.08 in.)
B—1600 mm (5 ft. 2.88 in.) 
rotary harvesting unit with
rigid frame
B—2000 mm (6 ft. 6.72 in.) 
rotary harvesting unit with
tilt frame
ZX1041092 —UN—19SEP07
152
040810
PN=24