Kemper 330 - Page 35

Attaching to a CLAAS Forage Harvester
KM00321,000026A 1909FEB103/7
Continued on next page KM00321,000026A 1909FEB104/7
3. First insert u.j. shaft into splined bushing (A) of the
rotary harvesting unit drive on the forage harvester.
A—Splined bushing
KM1000873 —UN—26MAY09
4. Secure u.j. shaft with bushing (A) and retaining nut (B).
A—Bushing B—Retaining nut
KM1000874 —UN—26MAY09
2510
040810
PN=35