Kemper 330 - Length of Cut and Drum Speeds with CLAAS Forage Harvester 830-900 (Type 493)

Operation of the Rotary Harvesting Unit
Continued on next page KM00321,0000284 1922FEB101/6
Length of Cut and Drum Speeds with CLAAS
Forage Harvester 830900 (Type 493)
2speed gear box
The twospeed gear box of the rotary harvesting unit is
available in two versions:
•
Speed increase for normal to long length of cut
(standard)
•
Speed reduction for short length of cut (option)
See tables below to determine lengthofcut adjustment.
Cutterhead with 28 knives (type 493)
Twospeed gear box (III) for normal to long length of
cut (standard)
KM1001122 —UN—22FEB10
I—Length of cut, number of knives II—Lengthofcut
transmission, forage
harvester
III—Rotary harvesting
unit drive
IV—Gathering drum
speed
2x14 knives 2x7 knives
Gear Gear
rpm
5.1 mm 10.2 mm 1 51
6.0 mm 12.0 mm 1 51
6.9 mm 13.8 mm 1 51
7.7 mm
15.4 mm 1 51
8.6 mm 17.2 mm
1
2 64
6.9 mm 13.8 mm 1 51
7.7 mm
15.4 mm 1 51
8.6 mm 17.2 mm 2 64
9.4 mm 18.8 mm 2 64
10.3 mm 20.6 mm 2 64
11.1 mm 22.2 mm 2 64
12.0 mm 24.0 mm
2
2 64
3014
040810
PN=66