Need help?Do you have a question about the Kemppi KEMPACT 253A and is the answer not in the manual?
General| Welding Process | MIG/MAG, TIG, MMA |
|---|---|
| Input Voltage | 3 x 400 V |
| Input Current | 16 A |
| Wire Diameter | 0.6 - 1.2 mm |
| Protection Class | IP23 |
| Power Supply | 3-phase |
| Duty Cycle | 60% |
| Duty Cycle (Alternative) | 100% |
| Standards | EN 60974-1 |
To Next Page
