Kenmore 19502 - O Thread Cutter

• Adjust the Presser Foot Lever
High
position
The Presser Foot Lever raises and lowers your
presser foot.
You can raise it about 1/4" hlgher for easy removal
of the presser foot or to help you place heavy
fabrics under the presser foot.
o Thread Cutter
cutter
You don't need a smssors to cut the thread after you finish sewing. Just use the handy thread
cutter on the back of the Presser Bar above the presser foot holder.
1. PuN thread through the groove until it is taut.
2. Then pull the thread sharply down and back to cut it.