76
17
The Commander and Transporter transfer audio and
commands as below:
SKY COMMAND
22
22
2 (U.S.A./ CANADA ONLY)
The Sky Command 2 allows remote control of a
TS-570D, TS-570S, or TS-870S HF transceiver. Besides
the HF transceiver, this system requires two transceivers
capable of working the Sky Command 2. This
transceiver and TH-D7A handhelds are currently
available. You will use one transceiver as a control
station called “Commander”. The transceiver connected
with the HF transceiver is called “Transporter”. It will
function as an interface between the Commander and
the HF transceiver. This system allows you, for
example, to watch for and hunt DX while washing your
car, or to operate the HF transceiver while relaxing in
your car, living room, or patio, instead of in your shack.
HF freq.
VHF freq.
UHF freq.
Your shack
To Next Page
Loading...
