KERN PNJ 600-3M User Manual

PNJ_PNS-BA-e-1713 41
9 Applications
9.1 Parts counting
Before the balance can count parts, it must know the average part weight (i.e.
reference). Proceed by putting on a certain number of the parts to be counted. The
balance determines the total weight and divides it by the number of parts, the so-
called reference quantity. Counting is then carried out on the basis of the calculated
average piece weight.
Factory setting

1. Call application
Press the F-button repeatedly until „Pcs“ is displayed.
2. Set to zero/taring
Press the TARE-button to set the balance to zero or to
tare when using a weighing container.

3. Reference setting
Press SET-key.
Wait until the currently set reference quantity will flash
in the display.

KERN PNJ 600-3M Specifications

General

Brand	KERN
Model	PNJ 600-3M
Category	Scales
Language	English