KERN PNJ 600-3M

PNJ_PNS-BA-e-1713 47
9.3.1 Enable function / settings in menu

Call up menu:
Press the F-key and keep pressed until „Func“ is
displayed.
When releasing the button, the first function „1.b.G.„ is
displayed with the current setting.
Enable function for tolerance weighing „2.SEL. 1“:
Press the F-key until „2.SEL.“ with the current setting is
displayed.
Enable the function using the TARE-key.
„2.SEL. 0“ Function deactivated
„2.SEL. 1“ Function activated
Use the F-key to select the next menu item “21.Co. for
setting the display conditions for the tolerance mark.
Use the TARE-key to select the desired setting
„21.Co. 1“
The tolerance mark is displayed with
stable and instable weighing values
„21.Co. 2“
The tolerance mark is only displayed with
stable weighing values.
Use the F-key to select the next menu item „22.Li. for
setting the tolerance range.