Need help?Do you have a question about the Kett FD-660 and is the answer not in the manual?
Explains warning, caution, and note symbols for safe operation.
Covers hazardous materials, control keys, stopping operation, setup/storage.
Explains how the analyzer works and lists its key features.
Lists the types of materials suitable for measurement.
Details measurement methods, ranges, accuracy, power, dimensions, etc.
Identifies the main components of the infrared moisture analyzer.
Lists all the accessories included with the instrument.
Explains the instrument's display elements.
Explains the functions of the instrument's control panel buttons.
Covers unpacking, unit placement, and checking the power supply voltage.
Steps for attaching the wind shield and sample dish stand.
Details connecting the power cord and optional printer.
Guide on turning on the unit and manually specifying the power supply voltage.
Covers initial settings, zero point adjustment, and sample placement.
Steps for starting, monitoring, and completing a measurement.
Actions after measurement, including reset, sample disposal, and preparing for the next cycle.
Recommendations for initial setup and using the preheat function.
Guidance on sample dish use, types, and preparation for various materials.
Managing external influences and specific cleaning for accuracy.
Explains storage areas and the general procedure for setting parameters.
How to configure measuring modes (AUTO/TIME).
Setting the drying temperature and measurement units (Wet/Dry/Solid base).
Setting data output format (PC/Printer) and offset bias.
Procedure for calibrating the instrument's scale.
General cleaning and care instructions for the unit.
Instructions for fuse and heater replacement.
Explains common error messages and their corresponding actions.
General| Resolution | 0.01% |
|---|---|
| Display | LCD |
| Measurement Method | Infrared |
| Measurement Range (Moisture Content) | 0.00% to 100.00% |
| Measurement Range (Solid Content) | 0.00% to 100.00% |
| Light Source | Halogen lamp |
| Interface | RS-232 |
To Next Page
